Getting Started
Carefully unpack your valance and check to make sure you have the following installation parts.  We recommend reading through these instructions before starting the installation.

1. Screws
2. Mounting Brackets

Please note that your brackets must be securely attached to the mounting surface.  If your screws do not hit wood, you must use the enclosed dry wall anchors provided.
Tools you will need

• Drill with a 1/8” bit and a hex head or Phillips head bit
• Phillips head screwdriver
• Metal tape measure

INSTALLING YOUR VALANCE
Mounting Brackets

OUTSIDE MOUNT
STEP 1
If your valance is outside mount, it will be placed on the window frame or adjacent wall space using the mounting brackets provided.  Valances over 48” will have additional brackets.  Attach the brackets on the wall or window frame at the desired height.  If mounting on the frame, place the brackets on the trim, if mounting on the wall, place the brackets at least the height of the brackets above the frame of the window or to the left or right if allowances were made.

Care and Cleaning
Minimal care and cleaning is needed to maintain the beauty of your valances.  To vacuum; use a hand held attachment with low suction.  To dust, use a hair dryer on a cool setting to remove surface dust.  If a more thorough cleaning is necessary, have them professionally cleaned.

Warranty
Draped in Details valances are covered by a limited lifetime warranty.  This warranty covers any defects in materials or workmanship so long as the product is measured and installed according to instructions.  Every Draped in Details valance is designed to provide trouble free use.  In the unlikely event that warranty service is ever needed, simply contact customer service at 203-522-4646 for assistance.